From the doorway, this Albany shower looked fine. The tile was up, the grout lines were straight, and nothing about it announced a problem. That is exactly how shower failures work. The damage happens behind the wall, out of sight, and by the time a shower feels soft underfoot or starts to smell musty, the water has usually been getting in for a long time.

Existing shower in an Albany, NY home before a repair of the failed shower pan, lower walls and plumbing by Moore Done Right
Existing shower in an Albany, NY home before a repair of the failed shower pan, lower walls and plumbing by Moore Done Right

When we opened this one up, the evidence was not subtle. Our moisture meter read 39.2 percent in the wall, which is a soaked wall by any standard. Then the tiles started coming off, and we found the reason why. Tile after tile released from the shower pan with almost no mortar transfer on the back of it. Mortar is the bond that holds tile to the surface beneath it. When a tile comes away nearly clean, it was never really bonded in the first place. A shower built that way is not waterproof in any meaningful sense. Every shower this homeowner took sent a little more water into a wall that had no way to dry out.

Moisture meter reading 39.2 percent in the wall behind a failed Albany shower
Moisture meter reading 39.2 percent in the wall behind a failed Albany shower
Tile released from a shower pan in Albany, NY showing almost no mortar transfer, the cause of the shower failure
Tile released from a shower pan in Albany, NY showing almost no mortar transfer, the cause of the shower failure

There is no honest cover-up for that, and there is no cover-up we would put our name on. Installing a new surface over a failing shower seals the moisture in and guarantees the problem comes back bigger. So this job became a repair of the failed pan, lower walls and plumbing – the limited scope the customer chose for budget reasons.

With the shower open, we redid the parts that decide whether a shower lasts. The drain was plumbed in new from the trap back, which is our standard on every job, along with supply lines cut 12 inches up from the floor and replaced with new Uponor PEX, and a new Delta valve body with a drop-ear elbow. That full plumbing redo is included in every Moore Done Right project, never sold as an upcharge. Then the waterproofing went in the way it should have gone in the first time, before a single tile was set, because waterproofing is a system behind the tile, not a hope pinned on grout.

The repair was finished in tile on lower walls and floor, with the original blue tile left in place up top, so the repaired shower belongs in the bathroom instead of looking like a patch. The finished photos at the bottom of this page are the same shower: solid underfoot, properly bonded, properly waterproofed, and built to be used every day without quietly rotting the wall behind it.

Rebuilt tile shower in Albany, NY by Moore Done Right after a repair of the failed shower pan, lower walls and plumbing
Rebuilt tile shower in Albany, NY by Moore Done Right after a repair of the failed shower pan, lower walls and plumbing
Alternate view of the finished rebuilt tile shower in Albany, NY
Alternate view of the finished rebuilt tile shower in Albany, NY

If your shower feels soft, smells musty, or the grout keeps cracking no matter how many times it is repaired, those are the early warnings of the same kind of failure. Catching it early is the difference between a planned rebuild and water damage that spreads into framing and floors. We start with a free in-home consultation, an hour or less, and you get a written estimate before any work begins. Call or text (518) 210-4372.

Bathroom remodeling in Albany, NY · What a shower remodel actually costs · Book a free in-home consultation · custom tile shower installer

Frequently Asked Questions

How do I know if my shower is failing behind the tile?

The early signs are a floor or wall that feels soft or spongy, a musty smell that does not go away, and grout that keeps cracking after repairs. A moisture meter reading behind the tile confirms it. In the Albany rebuild on this page, the wall read 39.2 percent moisture while the shower still looked fine from the doorway.

Can a failing shower just be covered over with a new surround?

It can be covered, but the failure stays underneath and the moisture keeps spreading. We do not install cover-ups. A failing shower gets a full tear-out back to the structure, the drain and waterproofing get fixed, and then it is rebuilt in the right order.

What does a shower rebuild cost in Albany, NY?

It depends on how far the water damage has spread, which is why we do not guess over the phone. The in-home consultation is free, takes an hour or less, and you get a written estimate with the full price before any work starts. Call or text (518) 210-4372.

Is the plumbing redone as part of a shower rebuild?

Yes. Our standard on every job is a full plumbing redo: supply lines cut 12 inches up from the floor and replaced with new Uponor PEX, a new Delta valve body with a drop-ear elbow, and a new drain plumbed in from the trap back. It is included, never an upcharge.

How long does a full tear-out shower rebuild take?

Most shower rebuilds take days, not weeks, once the tear-out shows us everything we are working with. If the damage has spread into framing or flooring, we show you exactly what we found and what it means for the timeline before we rebuild.